Have Questions?
-
Guaranteed Fitment
Always the correct part
-
In-House Experts
We know our products
-
Added Value
Installation Available
-
Delivery Updates
Email & SMS Updates
Chemigem D21P liquid chlorine & pH feeder Dual Pump
Chemigem D21P- Automatic Water Management System.
The D21we supply comes with Peristaltic pumps. These are now the prefered method of dosing, especially when using the modern ECO pumps.
This installation is where the system is installed on pressure line. E.g... where below water level or with accessories such as heaters.
The Chemigem range of controllers provides a fully automatic chemical management system for the two chemical values, that of Chlorine and pH, which require the most frequent attention in a swimming pool or spa. Chemigems are each effectively two controllers in one in that they monitor and correct the Chlorine and pH levels concurrently. They do this by using a pH Multi Electrode and Redox Multi Electrode to measure the pH balance and the Chlorine level in the water. The levels required (set points) are set at the control box and whenever the Multi Electrode senses that the levels in the water have moved from set points, dosing takes place. Dosing is achievedwith the Peristaltic pumps which areconnected to a container of Sodium Hypochlorite (Liquid Chlorine) and a container of diluted pool acid. A feed port is fitted to the return line after your filter or heater. When dosing is required the Peristaltic pumps deliver the required chemical to the water via the filter return lines. This continues until the level in the water matches the set level. If the chlorine level and the pH balance require correction at the same time dosing takes place alternately to avoid any interface between the two chemicals. Should either levels go out of range, due to the failure to replenish the reservoirs for example, there are audible and visual alarms to draw the operator's attention to the problem.
Because the Multi Electrode is so much more accurate than the conventional test kit and the controller is constantly on the job while the pool or spa is in use, the water is kept in a sanitary condition all the time and there is no chemical wastage due to overdosing. The direct injection method of dosing chemicals is extremely efficient which means that during heavy swimmer loads the recovery time of the chlorine level in particular is very short.
Dispatch times are 3-5 business days from time of ordering. If the product needs to be ordered in we will keep you updated and email the tracking number as soon as it is dispatched.
Delivery times are estimate only. All shipping is subject to weight and volume and some bulky orders may be charged at a different rate which will be quoted at checkout.
Budget Pool Care takes no responsibility for any damage or theft that may occur. If you will not be present to accept your delivery or you feel that your address is unsafe to have a parcel left unattended, we recommend having your article delivered to a trusted address (such as work address) where you can sign for it. If you miss your delivery, a card will be left to advise where your parcel can be collected. This information can also be viewed by clicking the track your order link in your shipping confirmation email.
INTERNATIONAL SHIPPING
International orders may be subject to local charges. Any customs or import duties and associated fees are charged once the parcel reaches its destination country.
These charges must be paid by the recipient of the parcel. We have no control over these charges and cannot predict what they may be. Budget Pool Care are not responsible for any additional charges on your order, nor can we accept a return of the order in this case.
Customs policies vary from country to country, so please contact your local customs office for further information. If you refuse to pay these charges your parcel may be abandoned, Budget Pool Care will not be held responsible for any loss of funds as a result of this occurrence.
